PCB Materials

  • Chemicals for galvanic through hole plating

Our chemical set for galvanic through-hole-plating is characterized by sturdity and process safety.

It consists of less bathes than regular chemistry.

 

  • Tenting resist


  • For our Dry film laminator RLM 419p we offer a high resolution dry film as etch resist. The rolls have a width of 304 mm and a length of either 25m or 152m. The tenting etch resist has a thickness of 38μm and is embedded between a separation and a protection foil. The resist is hardened by UV-light. The non-exposed areas are removed with an alkaline developer.

 

  • Solder mask

    Professional protection for your PCB! We offer a high resolution dry film for solder mask application . The rolls have a width of 304 mm and a length of either 25m or 76m,and 152m . The solder mask has a thickness of 75μm and is embedded between a separation and a protection foil. The solder mask is hardened by UV-light. The non-exposed areas are removed with an alkaline developer. After developing the solder mask should be hardened or baked either with an UV-light exposer or in a special oven.

 

For more about laminates Click Here

For more about Drilling and routing Bits Click Here

For more questions, please Contact us